Wear Resistance TMI Tempered Glass Custom Refrigerator Panels

Wear Resistance TMI Decorative Tempered Glass For Home Appliance Panel

Description of decorative tempered glass:

Before the use of decorative tempered glass, refrigerator panels and air conditioning panels are made of powder sprayed cold-rolled sheet, PCM, VCM or absps. The surface coatings of these opaque materials such as metals and plastics are all external coatings, which lack of three-dimensional sense in vision, and the coating is directly in contact with the outside world, which is easy to be affected by acid, alkali, alkali, etc The corrosion of salt, solvent and other gases or liquids has defects in easy cleaning, friction resistance, scratch resistance, aging resistance and other aspects. The advantages of tempered color crystal glass are clear at a glance, which can overcome and make up for these defects, meet the needs of consumers, meet the needs of the market and meet the needs of the times.

Features of Decorative Tempered Glass

1. Design concept of TMI product: Light pollution prevention, Dizziness prevention, Prevent dizziness, Anti-scratch, Environmental protection. The produce surface is elegant, natural, with a natural artistic effect.
2. High-quality float glass is selected as the base material, which can avoid the radiation of the natural marble. The product is green, environmental and safe. TMI products are not only used in home appliances, but also the best choice for furniture.
 

Application of Decorative Tempered Glass

Decorative tempered glass is widely used in refrigerator , air conditioner , microwe oven , washing machine etc.

Decorative Tempered Glass Shelves Edges
We create custom shelves out of glass at whatever length, depth, and thickness you need. Most of the times these shelves have exposed edges, giving you the option of adding another level of detail to better reflect your personal style. Our seamed edge comes standard with your order. If the edge is going to show, consider a rounded (pencil) or flat edge, as preferred by many as it gives a more finished look when edges are visible.
After choosing whether or not you want a rounded or flat edge, you get to choose between a polish or grind. A polish gives a shiny and glossy finish, while a grind provides a frosted matte finish. This small detail can impact the overall effect you want to create in your space.

TMI Adhension Test on Decorative Tempered Glass

Adhesion, Preheat 5 pieces in the environment of (100 ± 2) ℃ for 0.5h, and then naturally cool to room temperature. Select three non adjacent areas on each piece of workpiece, at least one 10 mm away from the edge, with a spacing of 1 mm and a 10 mm * 20 mm network grid (all cuts should be made to the surface of the substrate). After cleaning the surface paint layer with soft towel, paste the surface with 3m610 transparent tape, rub the tape with finger tip, and fully contact the coating color seen through the tape. Within 5min after sticking the adhesive tape, hold the hanging end of the tape, and tear off the adhesive tape steadily at an angle of 90 ° for 100 times within 0.5s ~ 1s. The coating on the front of the sample shall not fall off.

FAQ 

1. Q: Could you provide the sample for us to verify the quality?
A: Yes, we can provide the glass for you verify the quality if you would like to undertake the freight cost.
2. Q: What's the cut hole effect?
A: It depends on different thickness and for thick glass; we usually use water jet + CNC.
For thin glass, we use CNC for cut hole to make sure no breakage chips exist from hole edge.
3.Q: Is irregular shape glass available?
A: No problem because we will use shape cutting machine + CNC to make sure about the quality.
4.Q: How's the silk print effect?
A: GL received lots of praise in silk print quality base on import paints + auto silk print machine + dust free room
Available in high temperature silk print(The paint melt into glass) and low temperature paint(Pass adhesion test).