3.2mm Silk Screen Printing Glass

 Colored Custom Silk Screen Printing Glass For Refrigerator

Description of silk screen printing glass:

Silk Screen printing glass is inorganic glaze (also known as ink),printing to the glass surface, and then by drying, tempered or hot processing, the glaze permanent dry or sintering in the glass surface and get a kind of wear-resisting, resistance to acid and alkali of decorative glass products. This product has a high functional and decorative. It has many different colors and patterns, such as strip, mesh and the electric design and so on. Also can according to customers' different needs further design pattern.

Features: 

1. Silk screen printing glass has the unique gloss appearance, good light transmission.
2. Silk screen printing glass is printed at the back of glass and is covered with one layer protecting ink. So it would be corrosion resistance,  wear-resisting, resistance to acid and alkali of decorative glass product

3. Different patterns can be made. Its flower pattern or metallic effect is clearly visible and beautiful
4. Tempered glass can be custom-made.

Quality Inspection Item

1, Appearance, In the daytime (or in the case of similar brightness), observe vertically for 5 seconds with naked eyes or with the aid of glasses from a distance of 50cm or a distance of one arm length. No dirt or scratch, edge and corner, printing effect.

2, Printing appearance: the glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.

3, Evenness: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;

4, Granularity test: two pieces of tempered glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.

5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.

6, Thermal shock test: the tempered glass is heated to 287 5℃, and then immediately quenched with water (temperature 10 ~ 25℃) at the center of the glass plate, requiring the glass not to break.

Application

Silk screen printing glass is widely used as household appliance parts/ appliance accessory for oven door, oven control panel, microwave oven door glass, refrigerator glass door, fridge shelf, air conditioner, dish-washing machine panel, washing machine lid, dishwasher door, stove panel, switch panel glass, electronic products panel, kitchen electronic scale, electronic weighing scale, switch panel, etc.

FAQ 

1. Q: Could you provide the sample for us to verify the quality?
A: Yes, we can provide the glass for you verify the quality if you would like to undertake the freight cost.
2. Q: What's the cut hole effect?
A: It depends on different thickness and for thick glass; we usually use water jet + CNC.
For thin glass, we use CNC for cut hole to make sure no breakage chips exist from hole edge.
3.Q: Is irregular shape glass available?
A: No problem because we will use shape cutting machine + CNC to make sure about the quality.
4.Q: How's the silk print effect?
A: GL received lots of praise in silk print quality base on import paints + auto silk print machine + dust free room
Available in high temperature silk print(The paint melt into glass) and low temperature paint(Pass adhesion test).