Wifi Mark Printing Grill Oven 2 Holes 3mm Touch Panel Glass

Wifi Mark Printing Glass Control Panel For Grill Oven With Holes Drilled

Description of glass control panel:

This glass control panel is made of tempered glass and the two holes to fix switch of grill oven. Tempered glass is obtained by cutting the general annealed glass into the required scale, then heating it to 700 degrees of cloth near the softening point, and then cooling quickly and evenly. According to the different thickness of glass, the heating and cooling time is not the same). After tempering, the glass surface forms uniform compressive stress, while the internal part is tensile stress, which makes the bending and impact strength of glass improve, and its strength is about four times higher than that of the general annealed glass. Tempered glass can no longer be cut, ground or damaged, otherwise it will be "broken" due to the damage of uniform pressure stress balance. This is how the toughened glass panel is made.

Please Note:

Kindly note that the toughened glass can not be cut and processed again. Only before tempering, the glass can be processed to the required shape and then tempered. Although the strength of toughened glass is stronger than that of ordinary glass, it is possible to self explode (self crack) when the temperature difference changes greatly, while the general glass does not have the possibility of self explosion.

Features of glass control panel:

Glass control panel has the unique gloss appearance, good light transmission.
Glass control panel is corrosion resistance , easy clean, various colors.
Different patterns can be made. Its flower pattern or metallic effect is clearly visible and beautiful
Tempered glass can be custom-made.

Glass control panel printing:

Digital ceramic printer is the most advanced and multipurpose glass printing machine. This is perfect for auto motive, marine, interior-design, and exterior architectural glass, artwork, and appliances. The unique image processing software and digital ceramic inks make our high-tech printer go far beyond the limitations. It’s different from UV printing process, the color printed by UV can be brighter, but fade over time and can’t be tempered. The glass control panel printing ink of digital ceramic printing and silk-screen printing from Feihong Glass is high temperature ink, after being tempered, they will be stored for a long time without fading. It provides glass control panel of better flexibility, more speed, and high quality.

OEM Service for glass control panel:

We temper glass right here in our horizontal continuous tempering furnace. That means we can craft the glass to your exact specifications. Drill holes, grind edges, and make all necessary customizations to make it the perfect fit for your project, whether it’s tempered glass meant to replace fireplace door or custom tempered glass shelves. Then we heat treat it in our unique tempering furnace and ship it to you.
If you’re not sure whether or not your project or item should involve tempered or another kind of glass, feel free to contact us and we’ll walk you through some of the ins and outs regarding applicability, pricing, availability, etc.

Quality inspection items:

1, Printing appearance: the glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.
2, Evenness: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;
3, Granularity test: two pieces of tempered glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.
4, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.