Payment & Shipping Terms:
|Structure:||Solid||Printing:||Silk Screen Printing|
|Application:||Household Appliance||Machine:||CNC Processed Machine|
Physically Tempered Flat Edge Glass,
Silkscreen Flat Edge Glass,
Silkscreen 5mm Tempered Glass
Customized irregular Cnc tempered Glass Physically Tempered Finish
|Glass Type||Tempered Glass|
|Glass edging||Flat polish, pencil polish, miter, bevel, O.G. bull nose and etc|
|Process technics||Drill hole, edge polished, tempered, painting|
|Color||Clear, Ultra Clear, Various Green, Blue, Gray, Brown, can be customized|
|Equipment||US made TAMGLASS Continuous Tempering Furnace, Finnishing made TAMGLASS FLAT tempering Furnace, CNC processed center, water-jet machine|
|Application||architecture, glass wall, door, window, bar-protecter, furniture, automobile|
1. CNC tempered glass is a kind of safe glass and the fragment of which does no harm to people.
2. it's 4-5 times safer and harder than ordinary annealed glass.
3. Special logo and pattern can be printed on tempered glass.
4. Outstanding performance in resisting thermal stress and wind-load.
CNC tempered glass usage area:
Automobile, train, shipping, building, furniture, automatic door, escalator, fireplace, etc. CnC tempered glass is used when strength, thermal resistance and safety are important considerations. CNC tempered glass can be found in shower doors, patio doors, store fixtures and other applications that could be dangerous in the case of human impact.
Quality Inspection Item
1, CNC tempered glass Appearance, In the daytime (or in the case of similar brightness), observe vertically for 5 seconds with naked eyes or with the aid of glasses from a distance of 50cm or a distance of one arm length. No dirt or scratch, edge and corner, printing effect.
2, Printing appearance: the CNC tempered glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.
3, Evenness of CNC tempered glass: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;
4, Granularity test: two pieces of tempered glass are selected for each batch of CNC tempered glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.
5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the CNC tempered glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.
Contact Person: Kevin