CCC Corrosion Resistance 3.2mm Refrigerator Cabinet Panel Kits

Corrosion resistance Toughened Glass Refrigerator Door Panels 3.2mm thickness

Description of Refrigerator Door Panels:

In many families with children, they will worry that the toughened glass of the refrigerator with glass panel will be broken, which will easily cause scratches and cuts. Professionals say that if sharp objects are no longer pounded at a single point, they will not damage the panel. The new high-temperature ink toughened glass panel improves the overall appearance of the refrigerator, and is easier to clean, and the safety performance is more reliable. From the investigation of the after-sales service of the major brand refrigerator manufacturers, it is found that the personal injury caused by the toughened glass panel is very small.

Toughened glass refrigerator door panels

Toughened glass is generally used for preparing oven door, oven control panel, fridge glass door, fridge/ refrigerator/ freezer shelf, dish-washing machine panel, washing machine lid, switch panel etc. The tempered glass is used in preparing control panels for rich home appliances. The toughened glass is also used for dishwasher door, stove panel, electronic products panel, wine cabinet door, and for electronic weighing scale the toughened glass is used.
Toughened glass is thermally stronger than the normal glass. The glass undergoes intense stress due to which, the strength of glass increases. This glass is made through thermal tempering process where the annealed glass is heated at or above 720 degrees and soon after it reaches the heating point, cooling process is performed. The glass thus becomes strong and stressed.

Method of making tempered glass for refrigerator door panels
Tempered glass is a type of glass with even compressive stress on the surface which is made by heating float glass to nearly softening point and then cooling it down rapidly by air. During the instant cooling process, the exterior of glass is solidified due to rapid cooling while the interior of the glass is cooled down relatively slowly. The process will bring the glass surface compressive stress and the interior tensile stress which can improve the mechanical strength of glass by germination and result in good thermal stability.

Quality Inspection process
1, When the first 100 pieces of finished products are packed, the quality inspector shall inspect them at the inspection point of finished products.
2, The product will be inspected two times casually every shift.
3, Before the product is packaged or after the finished product is repaired, the quality inspector shall inspect it at the finished product inspection point.
4, After the product is packaged, the quality inspector will inspect it at the finished product inspection point.
5, If the finished product is stored for more than one month or for other special reasons, the warehouse administrator shall inform the quality inspector on duty to inspect it at the delivery site (visual inspection according to the standard and packaging scheme is in conformity).

Packaging Details of refrigerator door panels
1.Carton or wooden crates
2.Plastic protector of edge and corner
3.Meet customer's special requirement

OEM Service :
OEM glass is available here, just tell us the details of the specification and other special
Manufacturing technique and you can get the most satisfied product from us.