Physically Tempered Three Door 6mm Refrigerator Door Panels

Durable Safety Glass Refrigerator Door Panels For Three Door Refrigerator

Description of Refrigerator Door Panels:

Screen printing and UV spray painting are the most common technology in the field of glass panel production. With the three-dimensional spraying technology, the glass panel is full of art and full of visual reality; It can not only be simple and graceful, but also fashionable and modern to meet the needs of different consumers. The excellent quality and outstanding creativity of designers make the appearance more unique and novel, and the design is more diversified; the most significant features are: it feels flat, but it looks three-dimensional. There is a prominent prospect and deep background, realistic scenery, endowed with pure natural and beautiful three-dimensional lines and patterns. It Is the latest and most characteristic of a product surface decoration process, and it is the most gorgeous turning of glass pane!

Features of Tempered Glass Manufacturing Process

Toughened tempered glass is often used in applications where using standard glass could pose a potential danger. Toughened tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because small shards can greatly minimize potential danger in the case of a break. Feihong set a standard of the fragment state in 50*50mm to judge if it’s qualified toughened tempered glass based on global Electrolux oven glass Standard, GE standard, BSH Standard, British BS3193 Standard, etc. Manufactured through a process of extreme heating and rapid cooling, toughened tempered glass is much harder than normal glass.

Sizes of toughened glass
Toughened glass is available in different sizes as per the requirement or use. The home appliance glass thickness generally ranges between 3mm, 4mm, 5mm, and 6mm. In the modern household appliance, glass is considered as one of the luxurious and elegant material, due to it’s unique gloss appearance, good light transmission. However, when it comes to safety, toughened glass is the most secure and reliable material which can be used for home appliance purpose. In the house or office, glass panel provides an attractive and unique look.

Quality Inspection process
1, When the first 100 pieces of finished products are packed, the quality inspector shall inspect them at the inspection point of finished products.
2, The product will be inspected two times casually every shift.
3, Before the product is packaged or after the finished product is repaired, the quality inspector shall inspect it at the finished product inspection point.
4, After the product is packaged, the quality inspector will inspect it at the finished product inspection point.
5, If the finished product is stored for more than one month or for other special reasons, the warehouse administrator shall inform the quality inspector on duty to inspect it at the delivery site (visual inspection according to the standard and packaging scheme is in conformity).

Packaging & Shipping for refrigerator door panels
Our professional warehouse staffs supervise and ensure that our glasses are safely loaded and can reach the destination safely; we are constantly our packing and loading techniques to ensure easier unloading, minimal breakage, and other safeguards to combat seasonal changes in climate.

Main Equipments for manufacturing

Printing test for refrigerator door panels

1. Adhesion, Preheat 5 pieces in the environment of (100 ± 2) ℃ for 0.5h, and then naturally cool to room temperature. Select three non adjacent areas on each piece of workpiece, at least one 10 mm away from the edge, with a spacing of 1 mm and a 10 mm * 20 mm network grid (all cuts should be made to the surface of the substrate). After cleaning the surface paint layer with soft towel, paste the surface with 3m610 transparent tape, rub the tape with finger tip, and fully contact the coating color seen through the tape. Within 5min after sticking the adhesive tape, hold the hanging end of the tape, and tear off the adhesive tape steadily at an angle of 90 ° for 100 times within 0.5s ~ 1s. The coating on the front of the sample shall not fall off.
2. Frontal hardness, The hardness of the paint layer can be measured by 2H pencil, and the surface should be free of skin damage and scratch marks after the test.
3. Boiling water resistance, Under normal temperature and pressure, the test piece is completely immersed in boiling water for 2 h, then put into tap water to cool for 5 min, and then take out the observation sample. There should be no change in the front and back of the sample after the experiment.